Product Lineup


 


“Visualize Ventilation ” For more information

Download catalogues of new products (PDF)

[New product] Odor・CO2 Dual Sensor・Controller SMA-OVC-I

By “visualizing” the odor and CO2 concentration, dual control of ventilation equipment and deodorizing equipment can be conducted according to the measured value!

For more information

Living where carbon dioxide (CO2) concentration is “visible”

Safety! Relief! The final version for realizing an energy-saving and comfortable society!

Our products measure CO2 concentration and inform you of CO2 level! And, the data can be transmitted.

The HVAC (heating / ventilation / air conditioning) system is controlled by relays. Prevents health hazards (with varied device, such as alarms, ventilation fans, air conditioners, air conditioners, air purifiers, etc.)


What is a CO2 sensor controller / monitor?

The first CO2 measuring device in Japan that we are continuing to develop is the “CO2 sensor controller / monitor”. The “CO2 sensor controller” measures the CO2 concentration indoor and informs you of the CO2 level so that you can spend a comfortable and energy-saving living space. In recent years, in highly airtight buildings, the health hazard caused by indoor CO2 concentration is becoming a problem.

    • Schools・Libraries・Educational Facilities
    • Detached houses・Multi-unit Housings
    • Hospitals・Elderly and Nursing Facilities
    • Offices・Office Spaces
    • Hotels・Accommodations
    • Stores・Restaurants・Concert halls・Commercial Facilities

Why do we need to control CO2?

Being in a space with high CO2 concentration for a long time may cause health problems.

As shown in the figure below, it is said that when the indoor CO2 concentration increases, it gradually affects the human body. The recommended value set by the American Society of Heating, Refrigerating and Air-Conditioning Engineers is 1000ppm or less. It has been pointed out that exceeding this standard value may cause drowsiness and discomfort.


Also, in Japan, the following standards are set for the CO2 concentration in the living space, and from the viewpoint of legal compliance, it is necessary to adjust the indoor CO2 concentration so that it does not exceed 1000 ppm.


On the other hand, it does not mean that the CO2 concentration in the room should be low. The reason is that the lower the CO2 concentration in the room, the more outside air is taken in. As a result, the air conditioning load increases in summer and winter, which is far from energy saving. For example, if the ventilation system is operated more than necessary on a hot summer day, a large amount of hot outside air will be taken into the room. Although the CO2 concentration decreases, but the temperature indoor will rise. As a consequence of keeping the room temperature constant, the air conditioner has to operate at full capacity automatically and electricity cost soars significantly.


In a nutshell, as mentioned above, keeping the indoor CO2 concentration at an appropriate level (800ppm to 1000ppm) is necessary for an energy-saving and comfortable indoor space.


External output function of CO2 sensor controller (relay, analog, digital)

The CO2 sensor controller does more than just measure and display the CO2 concentration in the room. When the measured value exceeds the specified amount, the relay function is activated to control the externally connected device.

As shown in the above figure, by operating the ventilation equipment (such as ventilation fan, total heat exchanger, and etc.) connected to the controller, it is possible to adjust the CO2 concentration in the room and activate the alarm. With data logger function, by inserting a Micro-SD card into our products, you can also record changes in CO2 concentration, temperature, and humidity for varied analytical purposes.
In addition, the analog output (4-20mA, 0-10V) enables proportional control of VAV and data transmission / recording to the central monitoring room. Furthermore, it is also possible to transmit and record data in sequence by digital output such as RS232C and Modbus (RS485).

In short, by introducing a “CO2 sensor / controller / monitor”, it is possible to prevent health hazards and to spend your time in an energy-saving and comfortable environment.


CO2 sensor controller NMA series

All functions of measurement, display and control are integrated and can be used for varied applications!

For more information

CO2 sensor controller SMA-VRC series

Slim half-size new products

For more information

CO2 controller for horticulture facility SA-K03

Control for keeping proper CO2 concentration in greenhouses!

For more information

Pump Unit, SA-P01

Install with horticulture-facility CO2 controller, SA-K03. It is also applicable for ventilation purpose.

For more information

Photo Sensor, SA-S01

Illuminance meter for horticulture facilityInstall with horticulture-facility CO2 controller, SA-K03.

For more information

CO2 Monitor Marvel series

Living where carbon dioxide (CO2) concentration is “visible”! New Product: Data logger built-in model !

For more information